Rev9 R9-HS2-217_4 Hyper-Street II coilovers for Lincoln MKT 2010-2012, gallery view 1

Rev9 Hyper-Street II Coilovers - Lincoln MKT 2010-2012

Name: Rev9 Hyper-Street II Coilovers - Lincoln MKT 2010-2012
Brand: Rev9 Power
Price: 532.00 USD
Availability: InStock

$532.00

$532.00 $760.00

R9-HS2-217_4 - Rev9 Hyper-Street II Coilovers - Lincoln MKT 2010-2012

Rev9 Hyper-Street II coilovers combine monotube dampers, 32-position rebound adjustment and full-length height adjustment for a street-focused suspension setup that can be tuned to the vehicle and driver. Independent spring preload and overall-length adjustment allow ride height to be changed without shortening available damper travel.

Part Number: R9-HS2-217_4

Key Features

Monotube dampers with increased oil and gas capacity
32-position rebound damping adjustment
Full-length ride-height adjustment
Independent spring preload adjustment
Steel-alloy construction with aluminum hardware
Front pillow-ball top mounts
Rear setup reuses the factory top mounts
Spanner wrench set included in the gallery package

Vehicle Fitment

Lincoln MKT 2010-2012 — all trims, subject to the application note below where applicable.

Application note: Rev9's title identifies the chassis as D4, while its fitment text identifies D3. Models with CCD require a bypass module or CCD must be disabled in the ECU with FORScan. Verify chassis and CCD configuration before ordering.

Specifications

Specification	Front	Rear
Top mount	Pillow ball type	Reuse factory mount
Spring rate	10 kg/mm (560 lb/in)	14 kg/mm (784 lb/in)
Spring length	200 mm (7.87 in)	220 mm (8.66 in)
Spring inner diameter	62 mm (2.44 in)	88–97 mm (3.46–3.82 in)
Damping adjustment	32 levels
Height adjustment	Yes, full-length adjustment

Installation Notes

Professional installation is strongly recommended. A four-wheel alignment is required after installation. Verify suspension clearance, fastener torque, spring preload and ride height before driving. Follow the manufacturer's coilover user guide.