Honda Civic EM2 Rev9 Hyper-Street 3 coilovers

Rev9 Power Hyper-Street III Coilovers (Inverted Shocks, Extended Rear Top Hat 2.5") - Honda Civic Coupe/Sedan (EM2) 2001-05

$693.00
$693.00 $990.00
Skip to product information
Honda Civic EM2 Rev9 Hyper-Street 3 coilovers
  • Honda Civic EM2 Rev9 Hyper-Street 3 coilovers
  • Honda Civic EM2 Rev9 Hyper-Street 3 coilovers - image 2
  • Honda Civic EM2 Rev9 Hyper-Street 3 coilovers - image 3
  • Honda Civic EM2 Rev9 Hyper-Street 3 coilovers - image 4
  • Rev9 Hyper-Street 3 feature detail - image 5
  • Rev9 Hyper-Street 3 feature detail - image 6
  • Rev9 Hyper-Street 3 feature detail - image 7
  • Rev9 Hyper-Street 3 feature detail - image 8
  • Rev9 Hyper-Street 3 feature detail - image 9
Rev9 Power Hyper-Street III Coilovers (Inverted Shocks, Extended Rear Top Hat 2.5") - Honda Civic Coupe/Sedan (EM2) 2001-05

Rev9 Power Hyper-Street III Coilovers (Inverted Shocks, Extended Rear Top Hat 2.5") - Honda Civic Coupe/Sedan (EM2) 2001-05

$693.00
$693.00 $990.00

RST-AZE-X101 - Rev9 Power Hyper-Street III Coilovers (Inverted Shocks, Extended Rear Top Hat 2.5") - Honda Civic Coupe/Sedan (EM2) 2001-05

Take your vehicle’s handling to the next level with the Rev9 Power Hyper-Street 3 Coilover Kit. Engineered specifically for the Honda Civic Coupe / Sedan (EM2) 2001-2005, this premium upgrade combines race-inspired inverted front struts with 32-level damping adjustment. Whether daily driving or carving canyon roads, the Hyper-Street 3 balances an aggressive drop with refined ride comfort.

Fitment

Honda Civic Coupe / Sedan (EM2) 2001-2005

The Inverted Shock Advantage

  • Sharper steering response: Reduced unsprung weight helps the suspension react quickly to road imperfections.
  • Improved structural rigidity: The large outer casing helps minimize strut deflection under cornering loads.
  • Stable damping: Increased oil capacity improves heat management for consistent performance.

Key Features

  • Inverted mono-tube front struts with standard mono-tube rear shocks
  • 32-level adjustable damping
  • Independent full-length ride-height adjustment
  • Front pillow-ball camber plates and standard rear top mounts
  • Extended 2.5-inch rear top-hat configuration
  • Lightweight aluminum hardware
  • Front spring rate: 10 kg/mm (560 lb/in)
  • Rear spring rate: 12 kg/mm (672 lb/in)
  • Front spring: 180 mm length, 62 mm inner diameter
  • Rear spring: 140 mm length, 62 mm inner diameter

Front shocks: Inverted
Rear shocks: Traditional upright

Important — please read before purchasing

Before installation, verify all hardware and properly preload the suspension to 10 mm. A vehicle alignment is recommended after installation. Professional installation is strongly recommended. Rev9 Power warranty coverage requires installation by an ASE-certified mechanic.

California Proposition 65 warning: This product may expose you to nickel, which is known to the State of California to cause cancer and reproductive harm. Visit www.P65Warnings.ca.gov.

You may also like