Rev9 Power Hyper-Street II Coilovers - Mercury Mountaineer 2006-10

R9-HS2-222_3 - Rev9 Power Hyper-Street II Coilovers - Mercury Mountaineer 2006-10

Rev9 Power Hyper-Street II Coilovers are an entry-level suspension upgrade featuring mono-tube shocks with 32-way adjustable rebound settings. Full-length height adjustment is made through the lower bracket instead of compressing the spring. The mono-tube design provides greater oil and gas capacity for improved ride quality compared with lowering springs and stock shocks. Vehicle-specific spring rates improve handling, while 32 damping settings allow fine tuning of rebound force and ride comfort.

Key Features:

Fits 2006, 2007, 2008, 2009, 2010 Mercury Mountaineer (U251), all trims

• Front Spring Rate: 20 kg/mm (1120 lbs/inch)
• Rear Spring Rate: 18 kg/mm (1008 lbs/inch)
• Front Pillow Ball Top Mounts and Rear Standard Top Mounts
• Front and Rear Spring Length: 180 mm (7.09 inch)
• Front and Rear Spring Inner Diameter: 62 mm (2.44 inch)
• Full Steel Alloy Construction With Aluminum Hardware
• Mono-Tube Shocks Provide Larger Capacity of Oil And Gas
• 32 Clicks of Rebound Force Adjustment
• Full Length Adjustment - Lowers The Vehicle Without Ruining Spring Tension
• Independent Spring Tension - Custom Stiffness Without Changing Ride Height

**IMPORTANT** Please read before purchasing!

Prior to installation, please verify all hardware and properly preload suspension to 10mm. Vehicle realignment is recommended after installation. PROFESSIONAL INSTALLATION RECOMMENDED. This coilover set does not include vehicle-specific installation instructions. Rev9 Power will only warranty the item if it is installed by an ASE Certified Mechanic.

CALIFORNIA WARNING: Product contains nickel, which is known to the State of California to cause cancer and reproductive harm - www.P65Warnings.ca.gov