Rev9 Power Hyper-Street II Coilovers - Mercedes Benz CLS-Class Sedan 4Matic w/ Coil Suspension (C218) 2012-18
$532.00
Sale price
$532.00
Regular price
$760.00
Skip to product information
Rev9 Power Hyper-Street II Coilovers - Mercedes Benz CLS-Class Sedan 4Matic w/ Coil Suspension (C218) 2012-18
$532.00
Sale price
$532.00
Regular price
$760.00
R9-HS2-175 - Rev9 Power Hyper-Street II Coilovers - Mercedes Benz CLS-Class Sedan 4Matic w/ Coil Suspension (C218) 2012-18
Upgrade the handling and ride-height adjustability of your rear-wheel-drive Mercedes-Benz C218 with the Rev9 Power Hyper-Street II coilover kit. Designed for 2012-2018 CLS-Class sedans 4Matic w. coil suspension, this entry-level performance suspension uses monotube dampers, application-specific spring rates, and 32-way adjustable damping so you can tune the car for comfortable street driving or a firmer, more responsive setup.
Part number: R9-HS2-175
Key Features
- 32 levels of adjustable damping
- Independent ride-height adjustment through the lower mount helps preserve spring preload and suspension travel
- Monotube damper design with greater oil and gas capacity than typical twin-tube shocks
- Application-specific springs engineered to improve handling response
- Front pillow-ball top mounts with camber plates included
- Rear setup reuses the factory top mounts
Vehicle Fitment
Coilover Lowering Kit Compatible With Mercedes Benz CLS-Class Sedan 4Matic w/ Coil Suspension (C218) 2012 2013 2014 2015 2016 2017 2018; Service Light Will Illuminate On Dashboard Which Required Reprogramming To Turn Off.
Excludes vehicles equipped with electronic or self-leveling suspension. Vehicles with electronic suspension may require reprogramming to disable the suspension service warning. Verify your vehicle configuration before ordering.
Specifications
| Specification | Front | Rear |
|---|---|---|
| Top Mount | Pillow ball with camber plate included | Reuses factory mount |
| Spring Rate | 7 kg/mm (392 lb/in) | 11 kg/mm (616 lb/in) |
| Spring Length | 180 mm (7.09 in) | 210 mm (8.27 in) |
| Spring Inner Diameter | 62 mm (2.44 in) | 62–72 mm (2.44–2.83 in) |
| Damping Adjustment | 32 levels | |
| Height Adjustment | Yes | |
Installation Notes
- Inspect and verify all hardware before installation.
- Set spring preload to 10 mm before driving.
- Perform a four-wheel alignment after installation.
- Professional installation by an ASE-certified mechanic is strongly recommended and may be required for warranty coverage.
- Installation instructions are not included.
California Proposition 65 Warning: This product contains nickel, a chemical known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.