MSS0400-I Godspeed MonoSS coilovers for Audi A3 / S3 / A3 Quattro 8P 2006-2013 - gallery view 1

Godspeed Project MonoSS Coilovers - Audi A3 / S3 / A3 Quattro (8P) 2006-2013 (54.5 mm Front Axle Clamp)

$675.00
Sale price  $675.00 Regular price  $750.00
Skip to product information
MSS0400-I Godspeed MonoSS coilovers for Audi A3 / S3 / A3 Quattro 8P 2006-2013 - gallery view 1

Godspeed Project MonoSS Coilovers - Audi A3 / S3 / A3 Quattro (8P) 2006-2013 (54.5 mm Front Axle Clamp)

$675.00
Sale price  $675.00 Regular price  $750.00

Free shipping within the contiguous United States. Exclusions apply.

MSS0400-I - Godspeed Project MonoSS Coilovers - Audi A3 / S3 / A3 Quattro (8P) 2006-2013 (54.5 mm Front Axle Clamp)

 

Godspeed Project MonoSS coilovers combine a monotube damper with 16 levels of damping adjustment and independent ride-height and spring-preload adjustment for the Audi A3, S3 and A3 Quattro (8P). SAE9252 steel springs and a 52 mm carbon-steel shock body provide a configurable suspension setup for street and track use.

Part Number: MSS0400-I

Key Features

  • 16 levels of damping adjustment
  • Monotube shocks with performance internal pistons and anodized bodies
  • Cold-bent, high-strength SAE9252 steel springs
  • Front pillow-ball mounts with adjustable camber plates
  • Japanese KOYO 6204Z bearing
  • Independent ride-height and spring-preload adjustment
  • T7075 forged aluminum / carbon-steel brackets; polyurethane bushings where applicable
  • High-viscosity-index race shock oil
  • One-year manufacturer warranty from purchase date, subject to proof of authorized-dealer purchase and documentation of the defect

Vehicle Fitment

Audi A3 / S3 / A3 Quattro, 8P chassis, 2006-2013, subject to the clamp-size and damping restrictions below.

Front clamp-size verification required: Godspeed's product title and compatibility summary specify 54.5 mm, while its detailed installation note specifies 54.6 mm. Confirm the correct clamp specification with Godspeed for your vehicle before ordering or installation.

Not compatible with electronic damping. Rear factory top mounts must be reused.

Specifications

Specification Front Rear
Top mount Pillow ball with camber plate Reuse factory top mounts
Spring rate 6 kg/mm (336 lb/in) 6 kg/mm (336 lb/in)
Spring length 180 mm (7.09 in) 180 mm (7.09 in)
Spring inner diameter 62 mm (2.44 in) 62 mm (2.44 in)
Damping adjustment 16 levels
Height adjustment Yes

Installation Notes

Professional installation and a post-installation alignment are recommended. Verify and properly tighten all hardware before installation. Godspeed's detailed instructions specify 10 mm spring preload; its additional notes specify 5-10 mm. Follow the application-specific instructions and consult Godspeed technical support before setup. The source also includes a progressive-spring notation without identifying an axle.

Godspeed Coilover User Guide

California Proposition 65 Warning

WARNING: This product contains nickel, a chemical known to the State of California to cause cancer and reproductive harm, according to the manufacturer's warning. For more information, visit www.P65Warnings.ca.gov.

Godspeed Project logo
MANUFACTURER
Godspeed Project