ISR Adjustable Front Upper Camber Control Arms - Nissan 350z Infiniti G35

-10%

$373.50

$415.00

Free Shippping Icon

Barcode: IS-FUCA-Z33

Keeping proper alignment on your vehicle is absolutely paramount in making sure you have the most control possible. When a vehicle is lowered, the geometry of the suspension is changed affecting the surface contact your tires are able to make with the road. For maximum handling, you want as much surface contact as possible, as well as the ability to...

Keeping proper alignment on your vehicle is absolutely paramount in making sure you have the most control possible. When a vehicle is lowered, the geometry of the suspension is changed affecting the surface contact your tires are able to make with the road. For maximum handling, you want as much surface contact as possible, as well as the ability to change these setting to meet any road condition. Our camber kits are designed to do just that. Give you the adjustment capability you need to correct your alignment and give you maximum control over the handling of your vehicle. 

ISR's front upper camber arm set is designed to provide the maximum range of adjustment on your Nissan 350z and Infiniti G35. Unlike other arms on the market that require you to remove the ball joint for adjustment these arms are easily adjusted using a 19mm wrench without removing any components.  These arms include a high quality serviceable ball joint.

The factory 350z and G35 chassis are designed in such a way that the upper arm can only be extended to a certain length at a given ride height before coming into contact with the chassis. Our arms generally allow a wider range of adjustment at any given ride height than is able to be accommodated by the factory chassis control arm recess. Because of this, if you are attempting to reduce the negative camber gain associated with lowering your vehicle, depending upon the alignment specifications you desire, you may need to modify the factory control arm recess in the chassis to provide more clearance for the control arm to extend into. If you do not wish to modify the chassis control arm recess, that recess will restrict the overall length you can adjust the arm to, limiting the amount of camber correction you can achieve.

For lowered vehicles only**

**You must re-use your factory ball joint seat when installing these arms**

What’s in the Box:

  • 2x Front Camber arm
  • Typical Range +0.5 to -5.5 degrees
  • *This will NOT Fit 2007 Infiniti G35 Sedan**

** All ISR Performance Products are Designed for Off Road Use Only **


Application:

Infiniti: G35 Coupe & Sedan (2003-2007)

**WILL NOT FIT 07 Sedan**

Nissan: 350z (2003-2009)